By Matt Kolberg, Technical Consultant: Infrastructure, SolidCAD
So, you have a shiny new point cloud with a gazillion points in it, and you need a surface model in Civil 3D. It sounds easy, and it mostly is, provided you do the heavy lifting in Autodesk ReCap Pro before Civil 3D ever sees the data.
To create a Civil 3D surface from a point cloud, convert the scan to a ReCap project (RCP), run ground classification in ReCap Pro, then decimate the ground points to a count Civil 3D can handle (ideally under 2 million). Export the resulting key points to a new RCP, attach it in Civil 3D, create the surface from the point cloud, and choose No Filter on the last page of the wizard.
Point clouds come in many flavours: E57, LAS, LAZ, TXT, FARO, Leica, and the list goes on. Civil 3D does not import these formats directly; it reads only Autodesk ReCap files (RCP or RCS). Open ReCap Pro, import your scan file, and save it as an RCP.
Civil 3D cannot build a practical surface from a gazillion points. Twenty million would be a stretch; one million is no problem. On nearly every point cloud, a primary goal is to reduce the point count to something Civil 3D handles comfortably.
Results vary by project, but I aim for fewer than 2 million points wherever possible. Above that threshold, Civil 3D creates a companion MMS file for the surface. That is not a problem in itself; I simply prefer not to manage the extra file. If a project genuinely needs more, so be it. Autodesk explains the behaviour in its Civil 3D surface documentation.
How do we reduce the number of points? There is a two-part answer:
ReCap Pro has done both since version 2024.1. Run ground classification first, then decimation.
I usually use the Optimum setting, although some sites call for one of the other options.
When it finishes, the Project Navigator shows two classifications:
Opinions vary on the options here, and there is no single right number of points for every surface. A useful frame of reference:
Note 1: The 2 Ground classification is selected as the input. This is why ground classification comes first; there is no sense making the software decimate points it will never use.
Note 2: Decimation creates a new classification, 8 Model key-point. These are the points that will build the Civil 3D surface.
Note 3: My preference is to specify the exact number of points I ultimately need.
With those two tasks complete, you have just enough points to make a surface. Export the points from the 8 Model key-point classification that ReCap Pro created during decimation. They are saved as a new RCP file, which you can attach (XREF) in Civil 3D.
Once in Civil 3D, there is really only one thing to watch. Select the point cloud and create a surface from it. A wizard opens.
On the last page of the wizard, choose No Filter. Either of the other options makes Civil 3D attempt its own ground classification. ReCap Pro has already done that work, so nothing good comes from doing it again.
If the person who purchased the point cloud says, "I paid good money for 100 million points, dang it, I want you to use them!", I would suggest having a serious conversation about what a surface model actually needs.
Happy surfacing.
No. Civil 3D works with Autodesk ReCap point cloud files (RCP or RCS). Import the scan into ReCap Pro first and save it as an RCP.
It depends on the site and the accuracy required. As a working target, keep the surface under 2 million points; above that, Civil 3D creates a companion MMS file for the surface.
Classify ground first, then decimate only the 2 Ground points. Decimating the full cloud wastes processing time on points the surface will never use.
Choose No Filter. Ground classification has already been done in ReCap Pro, and the other options make Civil 3D repeat it.
Both tools are available in ReCap Pro 2024.1 and later.
Point clouds are only as useful as the surfaces your team can build from them. SolidCAD infrastructure specialists help civil teams set up repeatable reality capture workflows in ReCap Pro and Civil 3D, so every project starts from a surface you can trust. Contact SolidCAD at info@solidcad.ca.
Talk to a SolidCAD infrastructure expert.